Last updated: 21 November 2026
Since 12 August 2026, packaging sold in the European Union has been governed by a single rulebook: Regulation (EU) 2025/40, the Packaging and Packaging Waste Regulation, usually shortened to PPWR. It replaced the old packaging directive, and it applies to everyone who puts packaged goods on the market, from multinationals to a maker pouring twenty candles a week at the kitchen table.
If you make candles, wax melts, diffusers, or room sprays, you have probably seen alarming posts about it. Most of them mix up three very different things: rules that are in force today, rules that have been adopted but only bite around 2030, and changes that are still being negotiated in Brussels.
The three layers at a glance
| Status | What it covers | What it means for a small maker |
|---|---|---|
| In force since 12 August 2026 | Limits on hazardous substances in packaging, conformity documentation, identification of packaging, the definition of who is the “producer” for packaging-waste purposes | Keep supplier documents, know which packaging is “yours” in legal terms, check your cross-border sales |
| Adopted, applies later | Harmonised sorting labels (expected around 2028–2029), recyclability grades, recycled plastic content, packaging minimisation, and the 50% empty-space limit (2030 onwards) | Nothing to change overnight, but worth keeping in mind whenever you choose new packaging |
| Still under negotiation | Relief from the obligation to appoint an authorised representative in every EU country you sell into | Not law yet. The obligation stands until a final text is published. |
Is my candle jar packaging?
This is the question we hear most, and the answer is good news for candle makers.
The European Commission’s guidance on the regulation states that containers for tea lights and graveside lights, and other candle containers such as filled glasses and ceramic bowls, are not packaging. The reasoning is simple: the glass is needed while the candle burns, so it belongs to the product itself.
What is packaging? It is everything around the candle:
- the gift box or carton it is sold in
- sleeves, tags, tissue paper, and protective wrap
- the shipping box, tape, and void fill
Be careful not to stretch that clarification to other products. Bottles, jars, and pots are listed in the regulation as typical packaging formats. Until there is official guidance saying otherwise, treat these as packaging:
- reed diffuser bottles and their caps
- room spray bottles and triggers
- wax melt clamshells and pouches
- jars and bottles for soaps, creams or other cosmetics
What you need to have in place today
First, work out whose packaging it is
The heaviest duties fall on the packaging manufacturer. In PPWR terms that is not always the factory. It is whoever has packaging made under their own name or brand. So:
- Plain, off-the-shelf boxes, bottles, or mailers bought from a packaging supplier: the supplier is normally the manufacturer, and your job is to keep the documents they give you.
- Custom packaging printed with your brand: you may be the manufacturer in legal terms, even though you never touched a printing press. There is an important exception for micro-enterprises, explained in the next section.
Then, three practical requirements
1. Substances. Packaging must respect limits on substances of concern, notably heavy metals. You are not expected to send your cartons to a laboratory. This is information your packaging supplier should hold and pass on.
2. Documentation. The manufacturer draws up technical documentation and an EU declaration of conformity for the packaging and keeps them for five years (ten years for reusable packaging). If you are not the manufacturer, ask your supplier for the declaration and file it.
3. Identification. Packaging must carry a type, batch, or serial reference, plus the manufacturer’s name and address, so that it can be linked to its documentation. A reference per packaging type or production batch is enough. Nobody is asking for a serial number on every box.
What about the boxes already in your stockroom?
Use them. Packaging that was already on the market before 12 August 2026 can stay there. Packaging that was produced before that date and is still sitting in stock does not need to be destroyed, remade or relabelled; the identification details can be provided in an accompanying document instead.
And inspections?
The Commission has asked national authorities to take a corrective approach in this first phase: where a problem is found, the business should first be given the chance to fix it. That is not a licence to ignore the rules, but it does mean a small maker acting in good faith is not the target.
If you are a micro-enterprise
Most independent makers fall into the EU definition of a micro-enterprise: fewer than 10 people and an annual turnover or balance sheet of no more than €2 million. The regulation does not exempt micro-enterprises across the board, but it does lighten the load in two ways.
Your supplier can carry the manufacturer role. If you are a micro-enterprise and you buy your packaging, including branded packaging, from a supplier established in the same EU country as you, that supplier is treated as the manufacturer and as the producer in that country. This is a strong argument for buying packaging locally from an established supplier who can provide proper paperwork.
Small volumes mean simpler reporting. Producers who place less than 10 tonnes of packaging a year on the market of a given EU country benefit from reduced reporting. For context, 10 tonnes is far beyond what a typical craft business uses.
What does not exist is a general small-business exemption from packaging-waste obligations. If you are the one who first supplies packaged products in a country, you are responsible for that packaging there, whatever your size.
Selling to customers in other EU countries
This is the part that deserves your real attention.
EPR is not a new import tax
Extended Producer Responsibility (EPR) means that whoever puts packaging on a country’s market helps pay for collecting and recycling it there. It is not new: every EU country already ran a packaging EPR scheme before the PPWR. What the regulation does is harmonise who counts as the producer. There is no customs duty or “EU packaging fee” on a parcel travelling from one member state to another.
Who is the producer when you ship abroad?
You are. If your webshop in Portugal sends a candle straight to a consumer in Spain, France, or Germany, you are the producer of that packaging in the destination country. In practice that means registering with the national scheme there, declaring your volumes, and paying its fees. Fees for small quantities are usually modest; the paperwork is the real cost.
Selling to a shop or distributor abroad is different: the business that then supplies the product in its own country normally takes on the role.
The authorised representative: where things stand
On top of registration, the PPWR currently requires a producer to appoint an authorised representative in each EU country where it has EPR obligations but no establishment. For a small webshop shipping to ten countries, that is ten paid representatives, and it has been widely criticised as disproportionate.
The EU institutions are working on relief, but they do not yet agree on its shape:
| Institution | Who would be relieved | Until when |
|---|---|---|
| European Commission (proposal, December 2025) | All producers established in the EU | 1 January 2035 |
| European Parliament (position, 20 October 2026) | EU-based micro and small enterprises: fewer than 50 employees and up to €10 million turnover | A future circular economy act, or 2035 at the latest |
| Council of the EU (position, 21 October 2026) | EU-based producers placing less than 1 tonne of packaging a year in the country concerned | 1 January 2032 |
Parliament and Council now have to negotiate a single text. Under either version most small makers would be covered, which is encouraging. But two points matter:
- Nothing has changed yet. Until a final text is adopted and published, the obligation to appoint a representative remains the law.
- Any relief only removes the representative. Registration, reporting and fees in the destination country would continue to apply.
We will update this page when the final text is published.
What is coming later?
None of the following applies today. All of it is worth knowing before you order your next packaging run.
- Harmonised sorting labels. The EU-wide pictograms telling consumers which bin to use depend on technical rules the Commission has not yet adopted. They will apply two years after those rules are published, so realistically not before 2028–2029, with extra time to sell through older stock.
- Recyclability grades (2030). Packaging will be scored on how recyclable it is, and the weakest performers will eventually be barred from the market.
- Recycled content in plastic (2030). Plastic packaging will need a minimum share of recycled material. PET, PP, and other plastics are not banned.
- Minimisation (2030). Weight and volume must be kept to what the packaging actually needs to do. Double walls, false bottoms, and layers that exist only to make a product look bigger are on the way out.
- Empty space (2030 onwards). Shipping, grouped, and e-commerce packaging will be limited to 50% empty space.
The regulation does not prescribe materials. Glass, aluminium, cardboard and plastic all remain possible; what matters is how well the packaging performs against these criteria.
A sensible to-do list
- List your packaging. Write down every item you use, product by product: box, label, bottle, cap, mailer, filler. Leave out filled candle glasses.
- Note the supplier of each item and whether it is plain stock packaging or made with your branding.
- Ask each supplier for their PPWR declaration of conformity and keep it in one folder, with invoices showing batch or product references.
- Check where your parcels go. Pull a year of orders and count direct-to-consumer shipments per EU country. That tells you where EPR registration is relevant.
- Look at your shipping boxes. If a candle rattles in a box three times its size, moving to a closer fit saves money now and prepares you for 2030.
- Choose with 2030 in mind. When you next redesign, prefer single-material packaging that is easy to recycle, and avoid decorative layers that serve no function.
- Follow official sources, not headlines. The rules on the authorised representative in particular are likely to change in the coming months.
Quick questions
What does PPWR stand for? Packaging and Packaging Waste Regulation, the short name of Regulation (EU) 2025/40.
Do I have to stop using my current boxes? No. Existing stock can be used up.
Is PET banned? No. Plastic packaging will have recyclability and recycled-content requirements from 2030, but no material is banned outright.
I only sell at markets and to customers in my own country. Does this affect me? Much less. Your obligations are those of your own national packaging scheme, and if you are a micro-enterprise buying packaging from a supplier in your country, that supplier carries most of the PPWR role.
Do I have to pay something for every parcel I send to another EU country? There is no per-parcel EU charge. There may be registration and fees under the destination country’s packaging scheme, based on the weight of packaging you send there in a year.
What about the packaging my supplies arrive in? The bags, bottles and boxes that our waxes, fragrances and accessories are shipped in are our responsibility as the seller, not yours.