Standard delivery time is 3-4 Working days . May vary depending the volume of orders . Our preferred method of contact is email.
Standard delivery time is 3-4 Working days . May vary depending the volume of orders . Our preferred method of contact is email.
€9,90 EUR
We introduce EcoCoco, a new addition to the EcoSoya family by Kerax, of innovative plant-based waxes.
Supplied in pellets for easy use.
This wax is a 100% natural blend of predominantly coconut wax with natural and vegan, performance additives to improve burn and scent throw.
This wax does not contain any genetically modified ingredients, soy, palm, or paraffin products. It is bio-degradable and vegan-friendly.
EcoCoco ContainerBlend provides excellent hot and cold scent throw, a bright white color which is an identifying characteristic of coconut wax, and a smooth surface finish from a single pour with great glass adhesion.
Why Choose Ecococo from Ecosoya range
Unique Features:
Environmental and Health-Conscious Choice:
EcoCoco ContainerBlend provides excellent hot and cold scent throw, a bright white color which is an identifying characteristic of coconut wax, and a smooth surface finish from a single pour with great glass adhesion.
This wax can take a fragrance load of up to 12% with fragrance oils designed for use with natural waxes.
We recommend melting this wax to around 70 degrees Celsius and pouring it at approximately 60 degrees. We recommend a cure time of 48 hours.
As with all candle manufacturers, we recommend thorough testing with all wax, fragrance oil, and wick combinations.
Test Method Typical
Congealing Point °C ASTM D938 40
Melt Point °C DP70 ASTM D3954 55
Viscosity @ 100°C ASTM D445 6.60 cSt
Penetration @ 25°C ASTM D1321 90 dmm
Color ASTM D1500 0.3
This is a very easy wax to use with smooth tops all the time.
This wax doesn't substitute Pure Coco Wax as this is a blend of Coconut and natural additives.
The minimum cure time is 48 hours but 1 to 2 weeks is beneficial as it improves the Hot Throw in our opinion.
Works well with CL wicks as starter, Stabilo wicks, TCR and VRL ( depending on the fragrances ), and wooden wicks
Containers should be clean and free of contaminants. They should be at least at room temperature, although pre-heating to approx. 45 - 50°C can be beneficial.
When using powder dyes, heat the wax to approx. 75°C, add the dye and mix until dissolved. Powder dyes may also be dissolved in fragrance and then added to the melted wax, be sure that the dye has dissolved completely before adding. When using powder dyes dissolved in fragrance, liquid dyes, or colour blocks heat the wax to 70°C. If y ou wish to make your candle darker or “richer”, add a little black dye to the colour you are using.
EcoCoco ContainerBlend has been designed for fragrance at levels between 5 - 12%. Fragrance which is specifically developed for use with natural waxes is highly recommended. Burn pool size and depth greatly affect fragrance throw so correct wicking is paramount. Some fragrances may react poorly with the wax causing bleeding, objectionable surface finishes or poor flame quality. This has bee n found to be exaggerated when using fragrances specifically designed for use in Paraffin wax candles.
Natural waxes tend to require larger wick sizes than traditional paraffin waxes. Fragrance, colour, and candle configuration have a great impact on the best wick choice. Too large of a wick may cause sooting, accelerated burn times and guttering (wax leaking through the side of the candle). Too small a wick will cause tunnelling and produce a smaller flame. Keep wicks trimmed to ¼ inch. If you experience poor flame quality or stability, try a different type of wick.
Should be done after the candle has had a chance to sit for 48 hours after pouring.
Temporary high temperatures (up to 90°C) have no adverse effect as long as the wax is cooled back down quickly. Higher temperatures may cause the wax to discolour. Allow the wax to cool to your desired pour temperature, add the fragrance and mix well. Be sure to stir/mix the wax while melting. Avoid using receptacles containing copper and zinc as this may accelerate discolouration. Stainless Steel is the material of choice although mild steel is acceptable. Digital temperature probes are readily available and are a safer choice than the traditional Mercury in glass type.
Pour temperatures may vary according to container type & size, fragrance & dye used and the effects the candle maker wishes to achieve. Fragrance should be added and mixed immediately prior to pouring where practicable. If you experience difficulties with your pour temperature, try a lower or higher temperature in increments of 5 - 10°C. Consider pouring into pre heated containers.
Cool undisturbed candles at room temperature (about 25°C). Candles should be allowed to sit undisturbed for 48 hours before test burning.
Check wicking. Test burn the candle for burn pool diameter and “mushrooming” after it has cooled for 48 hours. Mushrooming is when carbon and/or other substances build up on the end of the wick interfering with combustion. Mushrooming can cause sooting and poor odours. Try different wicks until you have your desired burn pool diameter and a good clean flame.
Every combination of size, wax, dye, fragrance and wick must be tested for burn quality
Ecococo Contsiner Blend Technical Data Sheet
Ecococo Container Blend Safety Data Sheet
Política de Privacidade e Cookies
Perguntas frequentes sobre velas
Como queimar uma vela com segurança
© 2024 Eco Candle Project .
Se é proprietário de uma empresa que opera fora de Portugal e pretende a aplicação da isenção de IVA registe-se como cliente, antes de efetuar qualquer compra, envie-nos um email para info @ecocandleproject.com, com o nome da empresa e o NIF que registou, para que possamos validar o NIF e aplicar a isenção.